Rated @ 168 PSI @ 300F, quick opening ring lug lock door, digital control panel, National Board stamped. 1969 vintage. 0.5" thick shell. Very good condition.

Rated 55 PSI @ 300F, full vacuum jacketed chamber, air operated quick opening door, internal track, on saddles super heater rated 125 PSI @ 353F, CS steam accumulator tank with controls. 1972 vintage

Rated @ 400 GPM, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, on-board chemical tanks, sludge holding tank and NEMA 4X control panel. 25 year warr

Rated @ 20 GPM max, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, on-board chemical tanks, sludge holding tank and NEMA 4X control panel. 25 year w

Rated @ 200 GPM max, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, onboard chemical tanks, sludge holding tank and NEMA 4X control panel. 25 year w

Thin-film, single-effect, spinning cone evaporators designed for highly viscous slurry to 20,000cP. Rated @ 266 LPH (12-65 Brix). Complete with frame, pump, controls and instrumentation. FCA Australia

Thin-film, single-effect, spinning cone evaporator designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Includes 3 column pre-evaporator and tower, A/L P2-HL plate heat exchan

Thin-film, single-effect, spinning cone evaporator designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Includes A/L P2-HL plate heat exchanger, A/L PAR22 PHE, (2) A/L PAR01 P

Thin-film, single-effect, spinning cone evaporators designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Complete with frame, heat exchanger and pump. 1981 vintage. Very good

Dished top & bottom, rated @ 40 PSI full vacuum internal Allegheny Bradford U-tube heat exchanger, 18" x 28" rated @ 150 PSI @ 350F shell and tubes. 2001 vintage.

3 sq ft area, knife discharge, .25 HP XP drum drive, on stand.

FCA Europe.

Rated @ 2000 kg/h (5000 PPH), 38 KW motor 400/3/50/1480 Reduces corn into medium and course grits. FCA Europe.

Screw finishers are very well suited for the citrus juice industry. They separate the fibrous pulp from the liquid stream. Max speed 525 RPM, rated at 250 GPM. Cylinder screen chamber: 12" dia x 78" L

Rated @ 1000-3000 KPH, dehydrated moisture 81.5%, screens 1.5 x 2.8p x 1.0t / 1.2 x 2.3 x 1.0 / 1.0 x 2 x 0.8 with hopper. Setup for Sumitomo drive. Prior use: Surimi. 1989 vintage. Excellent conditio

Rated @ 1000-3000 KPH, dehydrated moisture 81.5%, screens 1.5 x 2.8p x 1.0t / 1.2 x 2.3 x 1.0 / 1.0 x 2 x 0.8 with hopper. Setup for Sumitomo drive. Prior use: Surimi. 1990 vintage. Excellent conditio

Rated 50psi/FV @ 281F internal, 150psi/FV @300F jacket. Dimple jacket is 304SS on shell and bottom head. Vessel is 6'4" diameter x 5'7" straight side w/welded dished top, slight cone bottom, 0.25" thi

47" W x 120" L x 48" H. 1999 vintage. Very good condition.

Rated at 4500 KPH. 30 KW motor 380/3/50/965 RPM. Prior use: Tomato juice. Very good condition. FCA Bangladesh.

Plate heat exchanger with 3 sections (heating, cooling and regeneration), rated @ 600 GPH (2271 LPH, 6500 PPH) with balance tank, holding tube assembly, hot water make-up system, booster and circulati