NEW: New Holland K-11 Centrifugal Dryer.
Max basket speed 1100 RPM, capacity 7 lbs, 1/8 HP motor 120/1/50/60, 600 W electric radiant heater, 6" x 6" basket in carbon steel, stainless steel or polypropylene SS and CS basket have 1/16" perfora
Tolhurst 9" Minute Man chip wringer.
Max bowl speed 1800 RPM, 414 x G, .85 cu ft capacity, max load 50 lbs. 1 HP motor 230/460/3/60/3450 RPM, brake and controls. Very good condition.
NEW: New Holland K-24 Centrifugal Dryer.
Max basket speed 825 RPM, capacity 75 lbs, 1 HP motor 230/3/50/60, 600 W electric radiant heater, 12 x 12" basket in carbon steel, stainless steel or polypropylene, various mesh screens or perforation
Nobles 12" x 18" chip wringer, SS.
Max bowl speed 725 RPM, rated @ 100 lbs/batch, lid lock, brake, 1.5 HP motor 220/440/3/60. Very good condition.
Fleshe 16" chip wringer.
Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 350 lbs. 3 HP motor 230/460/3/60/1775 RPM, brake and controls. 1970s vintage. Good condition.
Barrett Spintech 301-E chip wringer.
Max bowl speed 1200 RPM, 16" x 9" extractor, rated @ 75 lbs/batch, 2 HP motor 230/3/60 with VFD controller. (1) 5 gallon solid spun chip pan. Excellent condition.
Barrett 152-ES oil extractor-dryer.
Max bowl speed 1200 RPM, .8 CF capacity, 20 loads/hour, 18 x 8" wire mesh basket, rated @ 100 lbs/batch, 2/3 bushel, .5 HP motor 460/3/60, timer, safety interlock and control panel. 1988 vintage. Very
Mossberg-Hubbard 1225 carrier type oil extractor.
Max bowl speed 1100 RPM, 17" dia x 8" deep, rated @ 16 cu ft/hr, chip pan capacity 2/3 bushel (0.8 cu ft), (20) 100 LB loads/hr, 1 HP 2-speed motor 220/3/60/1725 RPM. Includes spare basket. Very good
Barrett Spintech 601-E chip wringer Versafuge system.
Max bowl speed 1100 RPM, 343 x G, 20.5" x 15" extractor, 130 lbs/batch, 3 HP motor 230/3/60 with VFD controller, (3) 10 gallon chip pans with dollies, sump tank with .25 HP pump, Hylatechnik 13.2 G po
NEW: Kinespin 402-GA 18 x 20 automated galvanizer.
Designed to spin excess molten zinc off hot dipped parts. Max bowl speed 900 RPM, 18" diameter x 20" deep basket, rated @ 120 lbs/load, 70 loads/hour. Direct drive motor 208/230/460/3/60 (specify volt
Barrett 402-E chip spinner.
Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr, max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake. Very good condition.
Barrett 401-SE sludge extractor.
Running speed 1200 RPM, sludge pan 23" x 15", 2.1 cuft (16 gallon) capacity, max load weight 225 lbs, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 3 baskets, 2 dollies and control panel. 1991 vi
Legrow Brothers 24 x 22 spin dryer, SS.
Max bowl speed 350 RPM, 40 x G, 300 lbs capacity. 3 HP motor 230/460/3/60/1750 RPM, 3/16" perforations SS basket and controls. Very good condition.
Barrett 401-SES sludge extractor.
Sludge pan 23" x 15", 2.1 cuft (16 gallon) capacity, max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 1 basket. Reconditioned and test run.
Barrett 402-E chip spinner.
Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr, max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 2 chip tubs and carts and control panel. Re
Legrow Brothers 24 x 22 spin dryer, SS.
Max bowl speed 350 RPM, 40 x G, 300 lbs capacity. 3 HP motor 230/460/3/60/1750 RPM, 3/16" perforations SS basket. Very good condition.
Tolhurst 26" Minute Man chip wringer.
Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 250 lbs. 5 HP motor 230/460/3/60/1775 RPM, brake and controls. Very good condition.
Heine 30" chip wringer.
Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 350 lbs. 3 HP motor 230/460/3/60/1775 RPM, brake and controls. 1970s vintage. Good condition.
Barrett 1101-E spindle post type chip spinner with hoist.
Max bowl speed 900 RPM, 30 x 14" basket ID, rated @ 68 cuft/hr, chip pan capacity 4.5 cuft, (15) 425 LB loads/hr. 10 HP motor 230/460/3/60, dynamic brake, timer control with lid locked until bowl come
Barrett Kine-Spin 1100-E carrier type chip spinner.
Max bowl speed 900 RPM, 30 x 14" basket ID, rated @ 68 cuft/hr, chip pan capacity 4.5 cuft, (15) 425 LB loads/hr. 10 HP motor 230/460/3/60/3450 RPM, dynamic DC brake, timer control with lid locked unt
