used centrifuge dealers • as-is • reconditioned • as-new   
Sanders Equipment Company Check our centrifuges online sandersequipment.com

Home
Check our featured stock online!
Talk to a Salesman - Inquiries and Help
Leasing Help
Sell your centrifuges
Sanders Equipment Company
Site Map

  basket centrifuges decanter centrifuges disc centrifuges
  pusher and peeler centrifuges screening centrifuges tubular centrifuges
  other centrifuges

Decanter Centrifuges on Oilfield Skids


SE800 Centrifuge
SE1000 Centrifuge
SE2000 Centrifuge


The SE800 is primarily for use in the environmental waste management industry but has found applications in many other areas as well. It is ideal for abrasive, sandy conditions and environmental applications where larger abrasive solids require separation. The SE800 features an 18" x 28" (457mm x 711mm) stainless steel rotating assembly driven by a 60 HP Marathon Explosion Proof motor.



Controls

  • The F-7 Yaskawa Variable Speed Drive
  • All controls are readily accessible to the operator
  • Integrated keypad LCD readout allows the operator to control the main drive, back drive and pump drive separately through a series of easy to use commands and computer prompts
  • Individual gauges for speed and unit torque allow for easy monitoring
  • Drive is housed in a steel weather-proof cabinet and positioned for safe operator useage

Feed Pump

  • Heavy duty Gorman Rupp Pump
  • Utilizes a 3" x 3", 20 HP Variable Speed Pump Drive specifically manufactured to deliver pre-selected volumes to the centrifuge

Gearbox

  • Unit uses an SA44 gearbox
  • 80 to 1 reduction ratio
  • Planetary system gearbox is a proven standard for the centrifuge industry

Features

  • Has a rated flow capacity of 251 gallons per minute (950 litres per minute)
    using water
  • Capable of producing 2617 G’s at 3200 rpm
  • Low amperage draw during start up and changes to rpm during operation mode due to Soft Start Variable Frequency Drive (VFD)
  • Precision balanced auger and bowl assembly producing vibration free performance and longer operational service
  • VFD allows for speed changes of the centrifuge and feed pump during
    operation to achieve optimum performance
  • Available adjustable stand allows for proper operational centrifuge height that enhances solids and liquid gravity discharge
  • Stellite wear liners used in all high wear areas such as solids discharge
    ports and feed nozzles

SE800 Centrifuge Specifications

 

Length

 (approx.)
110.5
 in 2807mm
 

Width

(approx.)
72.5
in 1842mm
 

Height

(approx.)
63.0
 in 1600mm
 

Weight

(approx.)
6700
 lbs 3040kg

 

Home | Check our Stock | Talk to a Salesman | Leasing Help
Sell your centrifuges | About Sanders Equipment Co. | Site Map

Sanders Equipment Company - used centrifuges

SANDERS EQUIPMENT COMPANY, INC.
Bill Sanders, CEO
3505 Tarpon Woods Boulevard, I-408
Palm Harbor, Florida 34685
Tel/fax: (727) 773-0077
centrifuges@sandersequipment.com


Privacy: We respect your right to privacy and will not
sell or rent your email address or personal information to
anyone. If you have privacy concerns, please contact us.

© 2000 Sanders Equipment Company, Inc. All Rights Reserved.