Decanter Centrifuges on Oilfield Skids

• The F-7 Yaskawa Variable Speed Drive
• All controls are readily accessible to the operator
• Integrated keypad LCD readout allows the operator to control the main drive, back drive and pump drive separately through a series of easy to use commands and computer prompts
• Individual gauges for speed and unit torque allow for easy monitoring
• Drive is housed in a steel weather-proof cabinet and positioned for safe operator useage

Feed Pump

• Heavy duty Gorman Rupp Pumps
• Utilizes a 4" x 4" 40HP Variable Speed Pump Drive specifically manufactured to deliver large volumes of abrasive solids to the centrifuge

Gearbox

• Unit uses an SA51 gearbox
• 80 to 1 reduction ratio
• Planetary system gearbox is a proven standard for the centrifuge industry

Features

• Has a rated flow capacity of 660 gallons per minute (2,500 litres per minute) using water
• Capable of producing 2016 G’s at 2600 rpm
• Low amperage draw during start up and changes to rpm during operation mode due to Soft Start Variable Frequency Drive (VFD)
• Precision balanced auger and bowl assembly producing vibration free performance and longer operational service
• VFD allows for speed changes of the centrifuge and feed pump during operation to achieve optimum performance
• Available adjustable stand allows for proper operational centrifuge height that enhances solids and liquid gravity discharge
• Stellite wear liners used in all high wear areas such as solids discharge ports and feed nozzles

SE2000 Centrifuge Specifications